Test results represent Minimum Average Roll Values (MARV) with the exception of weight which is a typical result.
Recommended Installation Instructions:
Place T-Posts no more than 10 feet apart (Note: Metal U-Post and rebar are not recommended).
Pull the safety fence taught and secure it to the posts with plastic zip ties. Loop the ties through the available holes or "teeth" in the post to hold the fence in position.
For added support, pull the safety fence taught and secure the fence between the flat side of the T-post with zip ties, or weave the slat through the fence mesh.
For increased support, the safety fence can be suspended from a wire (plastic, metal, rope, etc.) that should be woven through the upper openings of the safety fence mesh on both top and bottom and threaded through the posts.
To connect two fence sections, overlap both ends by at least 6 inches and weave a wood slat through the overlapped strands and secure the joined area to a T-post.
TEL: (714) 648-0888 FAX: (888) 766-9610 email@example.com 1509 E McFadden Ave, Santa Ana, CA 92705-4307 USA. Copyright 2009 Ameripacific. All rights reserved.